Edel 35 Manufacturer Brochure Extracts
L.O.A 3500" L.W.L 3106" BEAM 1910" DRAFT. SHOAL KEEL 210" DISPLACEMENT 7,000 lbs. SAIL AREA 721 sq ft FORE TRIANGLE (Height) 2903" FORE TRIANGLE J (base) 1804" MAIN-P (Luff) 3709" MAIN- E (foot) 1509" RIG SPARCRAFT NUMBER OF BERTHS 8 WATER CAPACITY 60 gal. AUXILIARY or 2 X 10hp TWIN DIESEL AUXILIARY 1 X 15hp OUTBOARD SAILS BM Sails WINCHES LEWMAR STOVE ENO STEERING GOIOT BLOCKS LEWMAR PORTHOLES GOIOT DESIGNER Maurice Edel YEAR INTRODUCED 1988
EDEL YACHT has been producing quality boats for more than 40 years, and is now well established as a leader among the builders of performance cruising catamarans.
Having demonstrated its qualities throughout the world, particularly in the very demanding charter industry, the EDEL CAT 35 holds excellent performance and safety records that other boats can merely emulate.
The EDEL CAT 35 has been ideally designed to provide exhilarating sailing while accommodating 8 persons in full cruising comfort. Each hull contains two private double berth cabins, separated by a head complete with washbowl and shower (optional). The bridgedeck cabin features an 8-person dining table, chart table and full galley with stove, double sink and huge ice box. All interiors are beautifully finished with solid wood, teak and holly cabin soles and textured gelcoat,
The boat hulls and the integral shoal keels optimize hydrodynamic profile and performance to windward, Attaining speeds in excess of 20 knots is quite typical. The low-windage bridgedeck cabin allows for exceptional visibility and access to the entire deck, while the sleek underbridge design eliminates wave slam. A high beam-to-length ratio ensures extreme stability and safety in even the roughest seas.
A generous 721 square feet of sail area, a fully battened easy-to-reef main, a furling jib, and the most reliable fittings complement the hull design and contribute to fast, uncomplicated cruising.
The hull, deck, and bridgedeck are constructed of reinforced molded fiberglass. Deck and hull are joined under pressure, and the hull skins are reinforced with Klegecell foam core, the hulls are also fitted with a high-density polyurethane foam core to create a positive flotation vessel. EDEL CAT hulls and bridgedeck are molded independently. The two hulls are then strongly united by three extruded alloy crossbeams upon which the bridgedeck is mounted. The rigidity achieved by this crossbeam construction is far superior to that of traditional single-mold designs.
EDEL Catamarans, "High Performance Cruising"... no longer a contradiction of terms !
GENERAL CONSTRUCTION AND LAYOUT
Hulls decks and center cabin are constructed from band layed-up fiberglass.
Closed cell foam core is used for strength in the bows and keels.
Two hulls connected by 12 clamps to three extruded anodized aluminum crossbeams.
Pod fastened to the center and aft crossbeams and through-bolted to inner hull deck flange.
Central crossbeam straigthened by dolphin striker.
Two fiberglass rudders formed around a solid aluminium shaft supported by two bearings at the skeg and the hull.
One hand operated bilge pump for each hull.
Upper and overhead side liners in all compartments.
One fluorescent lighting fixture in each compartment.
Cabin sole of moulded fiberglass and water resistant plywood.
Tinted windows outboard and aft opening Goiot hatch.
Storage bins above the hanging locker, under the outboard window, under the bunks, and under the aft hatch.
Double bunk (6'07"x 4'00") with 04" thick foam mattress.
TOILET COMPARTMENT (in port hull)
Tinted window outboard and overhead opening Goiot hatch.
Shower sump with wood cover with drainage.
Washbowl with seacock.
Faucet with handpump.
Twenty-five gallon fresh water tank.
Marine toilet with seacock on inlet and discharge.
Storage locker above washbowl with mirrored doors.
Storage bin under the outboard window.
Two doors with aluminum frame isolate toilet compartment from aft and forward cabins
LOCKER COMPARTMENT (in starboard hull)
Tinted window outboard and overhead opening Goiot hatch.
See optionals for second toilet compartment
Overhead opening 20"x 20" Goiot hatch.
Storage locker under the bunk.
Storage locker forward of the bunk,
Double bunk (6'07"x 3'09" tapered to forward) with 4" foam rnattress.
Galley with two burner stove,
Fiberglass double sink with hand pump and drain.
Tinted windows all around for panoramic forward vision and over head opening GOIOT hatch.
Demountable door (two parts).
Dining table (plain wood).
Twenty gallon ice box.
Separate function electrical panel with rocker switches and breakers for each circuit.
Twenty gallon fresh water tank.
Storage bin and lockers under the forward window.
Storage lockers outboard of seating.
Two anchor/ground tackle lockers with drains and deck cleats
Two storage lockers.
Two cockpit area storage lockers.
Genoa track port and starboard with adjustable cars.
Bow and stern pulpits with outboard lifelines.
Stern swim ladder.
Tiller system with double rods and central track.
Anchor roller in center of forward crossbeam:
Anodized aluminum mast (43'x 8.25"x 6.30"x 5/32" wall) with diamond shrouds, backstays and divided forestay, wiring tube and spare sheaves, one additional main halyard and spinnaker halyard.
One fully battened mainsall with adjustable battens and three reef points.
120 % roller furling jib sail.
Aluminum boom with line jammers for three reefing lines and outhaul..
Reefing lines, main sheet, jib sheets, main halyard, jib halyard.
Main sheet and jib sheet line stoppers.
Halyard winch (two speed),
Two jib sheet winches (two speed) with handles,
Roller furling winch.
Tri-color mast-head signal.